Slot Waveguide Design
- Waveguide-slot Array Antenna Designs For Low-average-sidelobe Specifications
- Waveguide Antenna Design
- Optics Letters
- Vol. 41,
- Issue 11,
- pp. 2501-2504
- (2016)
- •https://doi.org/10.1364/OL.41.002501
- Share
Omnidirectional Sector Waveguide SLOT Antenna L and C Band (1296 & 2320 MHz) The slotted waveguide has achieved most of its success when used in an omnidirectional role. It is the simplest way to get a real 10dB gain over 360 degrees of beamwidth. Key words: array antennas, edge-slotted waveguide, slot arrays, waveguide antennas, resonant shunt slots. ABSTRACT This paper presents the design, fabrication, and operation of an edge-wall slotted waveguide array antenna with metal flare for the generation of ultralow side lobes fan-beam radiation. The single traveling wave array antenna.
- Get CitationCopy Citation TextAbhijeet Phatak, Zhenzhou Cheng, Changyuan Qin, and Keisuke Goda, 'Design of electro-optic modulators based on graphene-on-silicon slot waveguides,' Opt. Lett. 41, 2501-2504 (2016)Export Citation
Abstract
We present a graphene-on-silicon (GoS) suspended vertical slot waveguide. By changing the Fermi level of graphene, the variation in the effective refractive index (RI) of the waveguide is a factor of two larger than that in the traditional GoS rib waveguide. The improvement is due to the light-intensity enhancement and the poor confinement of the optical mode in the slot nanostructure. We design Mach–Zehnder interferometer (MZI) and microring modulators based on the GoS suspended vertical slot waveguide. Our calculations show that the modulators can be energy-efficient and footprint-compact due to the large phase shift of the propagating mode in the waveguide after applying a gate voltage on the graphene. Fabrication of our design is easy and CMOS-compatible. It paves the way for chip-integrated electronic-RI modulators.
© 2016 Optical Society of America
Full Article PDF ArticleOSA Recommended ArticlesDesign of graphene-on-germanium waveguide electro-optic modulators at the 2μm wavelengthJiaqi Wang, Qiuxia Li, Dan Huang, Chongbin Liang, Yuzhi Chen, Lin Fang, Youfu Geng, Xueming Hong, and Xuejin Li
OSA Continuum 2(3) 749-758 (2019)
Waveguide-slot Array Antenna Designs For Low-average-sidelobe Specifications
One-dimensional photonic crystal slot waveguide for silicon-organic hybrid electro-optic modulatorsHai Yan, Xiaochuan Xu, Chi-Jui Chung, Harish Subbaraman, Zeyu Pan, Swapnajit Chakravarty, and Ray T. Chen
Opt. Lett. 41(23) 5466-5469 (2016)
Waveguide Antenna Design
Zhaolin Lu and Wangshi Zhao
J. Opt. Soc. Am. B 29(6) 1490-1496 (2012)
References
You do not have subscription access to this journal. Citation lists with outbound citation links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access OSA Member Subscription
Cited By
You do not have subscription access to this journal. Cited by links are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access OSA Member Subscription
Figures (5)
You do not have subscription access to this journal. Figure files are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access OSA Member Subscription
Equations (7)
You do not have subscription access to this journal. Equations are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access OSA Member Subscription
Metrics
You do not have subscription access to this journal. Article level metrics are available to subscribers only. You may subscribe either as an OSA member, or as an authorized user of your institution.
Contact your librarian or system administrator
or
Login to access OSA Member Subscription
A slot antenna consists of a metal surface, usually a flat plate, with one or more holes or slots cut out. When the plate is driven as an antenna by an applied radio frequency current, the slot radiates electromagnetic waves in a way similar to a dipole antenna. The shape and size of the slot, as well as the driving frequency, determine the radiation pattern. Slot antennas are usually used at UHF and microwave frequencies at which wavelengths are small enough that the plate and slot are conveniently small. At these frequencies, the radio waves are often conducted by a waveguide, and the antenna consists of slots in the waveguide; this is called a slotted waveguide antenna. Multiple slots act as a directivearray antenna and can emit a narrow fan-shaped beam of microwaves. They are used in standard laboratory microwave sources used for research, UHF television transmitting antennas, antennas on missiles and aircraft, sector antennas for cellular base stations, and particularly marine radar antennas. A slot antenna's main advantages are its size, design simplicity, and convenient adaptation to mass production using either waveguide or PC board technology.
Structure[edit]
As shown by H. G. Booker in 1946, from Babinet's principle in optics a slot in a metal plate or waveguide has the same radiation pattern as a driven rod antenna whose rod is the same shape as the slot, with the exception that the electric field and magnetic field directions are interchanged; the antenna is a magnetic dipole instead of an electric dipole; the magnetic field is parallel to the long axis of the slot and the electric field is perpendicular. Thus the radiation pattern of a slot can be calculated by the same well-known equations used for rod element antennas like the dipole. The waves are linearly polarized perpendicular to the slot axis. Slots up to a wavelength long have a single main lobe with maximum radiation perpendicular to the surface.
Antennas consisting of multiple parallel slots in a waveguide are widely used array antennas. They have a radiation pattern similar to a corresponding linear array of dipole antennas, with the exception that the slot can only radiate into the space on one side of the waveguide surface, 180° of the surrounding space. There are two widely used types:
- Longitudinal slotted waveguide antenna - The slots' axis is parallel to the axis of the waveguide. This has a radiation pattern similar to a collinear dipole antenna, and is usually mounted vertically. The radiation pattern is almost omnidirectional in the horizontal plane perpendicular to the antenna over the 180° azimuth in front of the slot, but narrow in the vertical plane, with the vertical gain increasing approximately 3 dB with each doubling of the number of slots. The radiation is horizontally polarized. It is used for vertical omnidirectional transmitting antennas for UHF television stations. For broadcasting, a cylindrical or semicircular waveguide is sometimes used with several columns of slots cut in different sides to give an omnidirectional 360° radiation pattern.
- Transverse slotted waveguide antenna - The slots are almost perpendicular to the axis of the waveguide but skewed at a small angle, with alternate slots skewed at opposite angles. This radiates a dipole pattern in the plane perpendicular to the antenna, and a very sharp beam in the plane of the antenna. Its largest use is for microwave marine radar antennas. The antenna is mounted horizontally on a mechanical drive that rotates the antenna about a vertical axis, scanning the antenna's vertical fan-shaped beam 360° around the water surface surrounding the ship out to the horizon with each revolution. The wide vertical spread of the beam ensures that even in bad weather when the ship and the antenna axis is being rocked over a wide angle by waves the radar beam will not miss the surface.
History[edit]
The slot antenna was invented in 1938 by Alan Blumlein, while working for EMI. He invented it in order to produce a practical type of antenna for VHF television broadcasting that would have horizontal polarization, an omnidirectional horizontal radiation pattern and a narrow vertical radiation pattern.[1][2]
Prior to its use in surface search radar, such systems used a parabolic segment reflector, or 'cheese antenna'. The slotted waveguide antenna was the result of collaborative radar research carried on by McGill University and the National Research Council of Canada during World War II.[3] The co-inventors, W.H. Watson and E.W. Guptill of McGill, were granted a United States patent for the device, described as a 'directive antenna for microwaves', in 1951.[4]
Other uses[edit]
In a related application, so-called leaky waveguides are also used in the determination of railcar positions in certain rapid transit applications. They are used primarily to determine the precise position of the train when it is being brought to a halt at a station, so that the doorway positions will align correctly with queuing points on the platform or with a second set of safety doors should such be provided.
See also[edit]
- Microwave Radiometer (Juno) (has a slot array antenna)
- RIMFAX (radar for Mars rover has slot antenna design)
References[edit]
- ^Blumlein, Alan (1938-03-07), 'Improvements in or relating to high frequency electrical conductors or radiators', British patent no. 515684
- ^Burns, Russell (2000). The life and times of A.D. Blumlein. Institution of Engineering and Technology. ISBN0-85296-773-X.
- ^Covington, Arthur E. (1991). 'Some recollections of the radio and electrical engineering division of the National Research Council of Canada, 1946-1977'. Scientia Canadensis: Canadian Journal of the HIstory of Science, Technology and Medicine. 15 (2): 155–175. doi:10.7202/800334ar.
- ^Watson, William Heriot; Guptill, Ernest Wilmot (6 November 1951), Directive Antenna for Microwaves, retrieved 20 December 2016
External links[edit]
- 'Slot Antennas'. Antenna Theory.
- Slotted Waveguide Antennas Antenna-Theory.com